NEXO EPB

ARDO CBR (Copper Bonded Rod)

Nexo Equi-potential Bonding    Nexo EPB Series          

 

Features:

  • High Peak Current capability
  • 50kA and 100kA (10/350uS)
  • Long service life
  • Weatherproof enclosure
  • Resin sealing
  • Anti-vibration

For security reasons and tempest requirements, there are usually separate ground systems in broadcasting, radios, communications, Radar system, Datacenter installations and so on. Undeniably, this is available to a certain extent. However, differences in ground potentials is unavoidable when lightning or other transient voltages occur and eventually equipment damage is something least desirable.

 

The Nexo Equi-potential Bonding can surely help. It is an isolation spark gap which can effectively clamp the grounds together to prevent ground potentials differences under transient conditions. Under normal situations, the EPB acts as an effective open circuit which will then closes at once if the ground potential difference is above the breakdown voltage of the ISG. The ground potentials are finally equalized. Besides, the EPB can be reset and operate for over ten thousand times.

 

Model

Nexo EPB250

Nexo EPB500

 

Spark-Over Voltage @100V/s Max Discharge Current, I max 8/20uS

600V

250kA

500kA

Nominal Discharge Current, 8/20uS

200kA

400kA

Impulse Current, 10/350uS

50kA

100kA

Voltage Protection Level @ 1kV/uS

< 1.4V

Insulation Resistance

> 1000MQ

Capacitance

< 30pF

Enclosure

Oxidized Aluminum, weather proof, resin sealed

Dimension & weight

D 35mm x L 180mm, 5.5g

Temperature

- 40°C ~ 90°C